Technical Data

Key Dimensions

• Spider Fitting
  • Double-arm.
  • Approximately 131mm from the centerline of spider fitting to the outside face of glass when installed.
• AB702T Articulating Bolt
  • This bolt is best used with thick glass (over 20mm or 7/8”) and/or where loads at the bolt are very high.
  • 70mm [2 3/4”] diameter bolt face (visible on glass surface).
  • Clean face visible with only two discreet fastening holes.
  • M16 support bolt.
  • In/out adjustability of +/- 4mm [5/32”].
  • Suitable for glass from 20mm to 40mm thick [7/8” to 1 ½”].
  • Recommended diameter hole in glass:
    • Minimum: 38.1 mm [1 ½”].
    • Recommended in laminate glass: 41.3 mm [1 5/8”].
    • Maximum: 44.5mm [1 ¾”].

Suggested Applications

• Walls, canopies and many more where single-glazed glass is over 20mm.

Materials

• Stainless Steel Grade 316 (standard).
• Duplex Steel Grade 2205 (upon request).

Finishes

• Satin (standard).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Four-arms.
  • Approximately 131mm from the centerline of spider fitting to the outside face of glass when installed.
• AB702T Articulating Bolt
  • This bolt is best used with thick glass (over 20mm or 7/8”) and/or where loads at the bolt are very high.
  • 70mm [2 3/4”] diameter bolt face (visible on glass surface).
  • Clean face visible with only two discreet fastening holes.
  • M16 support bolt.
  • In/out adjustability of +/- 4mm [5/32”].
  • Suitable for glass from 20mm to 40mm thick [7/8” to 1 1/2”].
  • Recommended diameter hole in glass:
    • Minimum: 38.1 mm [1 ½”].
    • Recommended in laminate glass: 41.3 mm [1 5/8”].
    • Maximum: 44.5mm [1 ¾”].

Suggested Applications

• Walls, canopies and many more where single-glazed glass is over 20mm.

Materials

• Stainless Steel Grade 316 (standard).
• Duplex Steel Grade 2205 (upon request).

Finishes

• Satin (standard).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Single-arm.
  • Approximately 157mm from the face of the structure to the outside face of glass when installed.
• AB702T-DN Articulating Bolt
  • This bolt is used with double-glazed glass.
  • 70mm [2 3/4”] diameter bolt face (visible on glass surface).
  • Clean face visible with only two discreet fastening holes.
  • M16 support bolt.
  • In/out adjustability of +/- 4mm [5/32”].
  • Suitable for IGU glass from 24mm to 40mm [7/8” to 1 ½”].
  • Recommended diameter hole in glass:
    • 47.6mm [1 7/8”].
    • Speak to us regarding instructions to glass fabricators.

Suggested Applications

• Double-glazed glass walls.

Materials

• Stainless Steel Grade 316 (standard).
• Duplex Steel Grade 2205 (upon request).

Finishes

• Satin (standard).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Single-arm.
  • Approximately 133mm from the centerline of spider fitting to the outside face of glass when installed.
• AB702T-DN Articulating Bolt
  • This bolt is used with double-glazed glass.
  • 70mm [2 3/4”] diameter bolt face (visible on glass surface).
  • Clean face visible with only two discreet fastening holes.
  • M16 support bolt.
  • In/out adjustability of +/- 4mm [5/32”].
  • Suitable for IGU glass from 24mm to 40mm [7/8” to 1 ½”].
  • Recommended diameter hole in glass:
    • 47.6mm [1 7/8”].
    • Speak to us regarding instructions to glass fabricators.

Suggested Applications

• Double-glazed glass walls.

Materials

• Stainless Steel Grade 316 (standard).
• Duplex Steel Grade 2205 (upon request).

Finishes

• Satin (standard).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Single-arm.
  • Approximately 157mm from the face of the structure to the outside face of glass when installed.
• AB702T-DN Articulating Bolt
• This bolt is used with double-glazed glass.
• 70mm [2 3/4”] diameter bolt face (visible on glass surface).
• Clean face visible with only two discreet fastening holes.
• M16 support bolt.
• In/out adjustability of +/- 4mm [5/32”].
• Suitable for IGU glass from 24mm to 40mm [7/8” to 1 ½”].
• Recommended diameter hole in glass:
  • 47.6mm [1 7/8”].
• Speak to us regarding instructions to glass fabricators.

Suggested Applications

• Double-glazed glass walls.

Materials

• Stainless Steel Grade 316 (standard).
• Duplex Steel Grade 2205 (upon request).

Finishes

• Satin (standard).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arm.
  • Approximately 157mm from the face of the structure to the outside face of glass when installed.
• AB702T-DN Articulating Bolt
  • This bolt is used with double-glazed glass.
  • 70mm [2 3/4”] diameter bolt face (visible on glass surface).
  • Clean face visible with only two discreet fastening holes.
  • M16 support bolt.
  • In/out adjustability of +/- 4mm [5/32”].
  • Suitable for IGU glass from 24mm to 40mm [7/8” to 1 ½”].
  • Recommended diameter hole in glass:
    • 47.6mm [1 7/8”].
• Speak to us regarding instructions to glass fabricators.

Suggested Applications

• Double-glazed glass walls.

Materials

• Stainless Steel Grade 316 (standard).
• Duplex Steel Grade 2205 (upon request).

Finishes

• Satin (standard).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arm.
  • Approximately 157mm from the face of the structure to the outside face of glass when installed.
• AB702T-DN Articulating Bolt
  • This bolt is used with double-glazed glass.
  • 70mm [2 3/4”] diameter bolt face (visible on glass surface).
  • Clean face visible with only two discreet fastening holes.
  • M16 support bolt.
  • In/out adjustability of +/- 4mm [5/32”].
  • Suitable for IGU glass from 24mm to 40mm [7/8” to 1 ½”].
  • Recommended diameter hole in glass:
    • 47.6mm [1 7/8”].
  • Speak to us regarding instructions to glass fabricators.

Suggested Applications

• Double-glazed glass walls.

Materials

• Stainless Steel Grade 316 (standard).
• Duplex Steel Grade 2205 (upon request).

Finishes

• Satin (standard).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arm.
  • Approximately 133mm from the centerline of spider fitting to the outside face of glass when installed.
• AB702T-DN Articulating Bolt
  • This bolt is used with double-glazed glass.
  • 70mm [2 3/4”] diameter bolt face (visible on glass surface).
  • Clean face visible with only two discreet fastening holes.
  • M16 support bolt.
  • In/out adjustability of +/- 4mm [5/32”].
  • Suitable for IGU glass from 24mm to 40mm [7/8” to 1 ½”].
  • Recommended diameter hole in glass:
    • 47.6mm [1 7/8”].
  • Speak to us regarding instructions to glass fabricators.

Suggested Applications

• Double-glazed glass walls.

Materials

• Stainless Steel Grade 316 (standard).
• Duplex Steel Grade 2205 (upon request).

Finishes

• Satin (standard).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arm.
  • Approximately 133mm from the centerline of spider fitting to the outside face of glass when installed.
• AB702T-DN Articulating Bolt
  • This bolt is used with double-glazed glass.
  • 70mm [2 3/4”] diameter bolt face (visible on glass surface).
  • Clean face visible with only two discreet fastening holes.
  • M16 support bolt.
  • In/out adjustability of +/- 4mm [5/32”].
  • Suitable for IGU glass from 24mm to 40mm [7/8” to 1 ½”].
  • Recommended diameter hole in glass:
    • 47.6mm [1 7/8”].
  • Speak to us regarding instructions to glass fabricators.

Suggested Applications

• Double-glazed glass walls.

Materials

• Stainless Steel Grade 316 (standard).
• Duplex Steel Grade 2205 (upon request).

Finishes

• Satin (standard).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Four-arms.
  • Approximately 157mm from the face of the structure to the outside face of glass when installed.
• AB702T-DN Articulating Bolt
  • This bolt is used with double-glazed glass.
  • 70mm [2 3/4”] diameter bolt face (visible on glass surface).
  • Clean face visible with only two discreet fastening holes.
  • M16 support bolt.
  • In/out adjustability of +/- 4mm [5/32”].
  • Suitable for IGU glass from 24mm to 40mm [7/8” to 1 ½”].
    • Recommended diameter hole in glass:
      • 47.6mm [1 7/8”].
  • Speak to us regarding instructions to glass fabricators.

Suggested Applications

• Double-glazed glass walls.

Materials

• Stainless Steel Grade 316 (standard).
• Duplex Steel Grade 2205 (upon request).

Finishes

• Satin (standard).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Single-arm.
  • 75mm from the center of spider to center of articulating bolt.
  • Approximately 92mm from the face of the structure to the outside face of glass when installed (distance will change with glass thickness).
• NB502 Non-articulating Bolt
  • 50mm diameter tapered face.
  • M10 support bolt with a M8 hole in glass.
  • Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls, infill panels or canopies with minimal or no snow or wind load.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.
• Face-mounting onto steel structures, HSS profiles or concrete.
• Monolithic and laminated glass from 10mm to 19mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Four-arms.
  • Approximately 133mm from the centerline of spider fitting to the outside face of glass when installed.
• AB702T-DN Articulating Bolt
  • This bolt is used with double-glazed glass.
  • 70mm [2 3/4”] diameter bolt face (visible on glass surface).
  • Clean face visible with only two discreet fastening holes.
  • M16 support bolt.
  • In/out adjustability of +/- 4mm [5/32”].
  • Suitable for IGU glass from 24mm to 40mm [7/8” to 1 ½”].
  • Recommended diameter hole in glass:
    • 47.6mm [1 7/8”].
  • Speak to us regarding instructions to glass fabricators.

Suggested Applications

• Double-glazed glass walls.

Materials

• Stainless Steel Grade 316 (standard).
• Duplex Steel Grade 2205 (upon request).

Finishes

• Satin (standard).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Four-arms.
  • 150mm between feet of spider.
  • Approximately 70mm from the centerline of the spider fixing to the outside face of glass when installed (distance will change with glass thickness).
• NB501C Non-articulating Bolt
  • 50mm diameter back plate with countersunk bolt face (flush with glass surface).
  • M8 support bolt.
  • Minimum 19mm [3/4”] diameter countersunk hole in glass (upon order we can supply a sample bushing for you to forward to your glass fabricator to ensure correct sizing).

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls or infill panels.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Not reccomended for canopies.
• Side-mounting onto glass or metal fins.
• Monolithic glass from 10mm to 12mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arm.
  • 150mm between feet of spider.
  • Approximately 70mm from the centerline of the spider fixing to the outside face of glass when installed (distance will change with glass thickness).
• NB501C Non-articulating Bolt
  • 50mm diameter back plate with countersunk bolt face (flush with glass surface).
  • M8 support bolt.
  • Minimum 19mm [3/4”] diameter countersunk hole in glass (upon order we can supply a sample bushing for you to forward to your glass fabricator to ensure correct sizing).

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls or infill panels.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Not reccomended for canopies.
• Side-mounting onto glass or metal fins.
• Monolithic glass from 10mm to 12mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Single-arm.
  • Approximately 70mm from the centerline of the spider fixing to the outside face of glass when installed (distance will change with glass thickness).
• NB501C Non-articulating Bolt
  • 50mm diameter back plate with countersunk bolt face (flush with glass surface).
  • M8 support bolt.
  • Minimum 19mm [3/4”] diameter countersunk hole in glass (upon order we can supply a sample bushing for you to forward to your glass fabricator to ensure correct sizing).

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls or infill panels.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Not recommended for canopies.
• Side-mounting onto glass or metal fins.
• Monolithic glass from 10mm to 12mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of
  glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Four-arms.
  • 150mm between feet of spider.
  • Approximately 85mm from the face of the structure to the outside face of glass when installed (distance will change with glass thickness).
• NB501C Non-articulating Bolt
  • 50mm diameter back plate with countersunk bolt face (flush with glass surface).
  • M8 support bolt.
  • Minimum 19mm [3/4”] diameter countersunk hole in glass (upon order we can supply a sample bushing for you to forward to your glass fabricator to ensure correct sizing).

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls or infill panels.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Not recommended for canopies.
• Face-mounting onto steel structures, HSS profiles or concrete.
• Monolithic glass from 10mm to 12mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arm.
  • Approximately 85mm from the face of the structure to the outside face of glass when installed (distance will change with glass thickness).
• NB501C Non-articulating Bolt
  • 50mm diameter back plate with countersunk bolt face (flush with glass surface).
  • M8 support bolt.
  • Minimum 19mm [3/4”] diameter countersunk hole in glass (upon order we can supply a sample bushing for you to forward to your glass fabricator to ensure correct sizing).

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls or infill panels.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Not reccomended for canopies.
• Face-mounting onto steel structures, HSS profiles or concrete.
• Monolithic glass from 10mm to 12mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arm.
  • 150mm between feet of spider.
  • Approximately 85mm from the face of the structure to the outside face of glass when installed (distance will change with glass thickness).
• NB501C Non-articulating Bolt
  • 50mm diameter back plate with countersunk bolt face (flush with glass surface).
  • M8 support bolt.
  • Minimum 19mm [3/4”] diameter countersunk hole in glass (upon order we can supply a sample bushing for you to forward to your glass fabricator to ensure correct sizing).

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls or infill panels.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Not recommended for canopies.
• Face-mounting onto steel structures, HSS profiles or concrete.
• Monolithic glass from 10mm to 12mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Single-arm.
  • Approximately 85mm from the face of the structure to the outside face of glass when installed (distance will change with glass thickness).
• NB501C Non-articulating Bolt
  • 50mm diameter back plate with countersunk bolt face (flush with glass surface).
  • M8 support bolt.
  • Minimum 19mm [3/4”] diameter countersunk hole in glass (upon order we can supply a sample bushing for you to forward to your glass fabricator to ensure correct sizing).

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls or infill panels.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Not recommended for canopies.
• Face-mounting onto steel structures, HSS profiles or concrete.
• Monolithic glass from 10mm to 12mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.