Technical Data

Key Dimensions

• Spider Fitting
  • Single-arm.
  • Approximately 108mm from the face of the structure to the outside face of glass when installed.
• AB502T Articulating Bolt
  • 50mm [2”] diameter bolt face (visible on glass surface).
  • Clean face visible with only two discreet fastening holes.
  • M12 support bolt.
  • In/out adjustability of +/- 6mm [1/4”].
  • Suitable for glass from 10mm to 21.5mm thick [3/8” to 7/8”].
  • Recommended diameter hole in glass:
  • Minimum: 31.8 mm [1 1/4”].
  • Recommended in laminate glass: 34.9 mm [1 3/8”].
  • Maximum: 38.1 mm [1 1/2”].

Suggested Applications

• Screens, interior partitioning walls, canopies, and many more.

Materials

• Stainless Steel Grade 316 (standard).

Finishes

• Satin (standard).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Single-arm.
  • Approximately 93mm from the centerline of the spider fixing to the outside face of glass when installed.
• AB502T Articulating Bolt
  • 50mm [2”] diameter bolt face (visible on glass surface).
  • Clean face visible with only two discreet fastening holes.
  • M12 support bolt.
  • In/out adjustability of +/- 6mm [1/4”].
  • Suitable for glass from 10mm to 21.5mm thick [3/8” to 7/8”].
  • Recommended diameter hole in glass:
  • Minimum: 31.8 mm [1 1/4”].
  • Recommended in laminate glass: 34.9 mm [1 3/8”].
  • Maximum: 38.1 mm [1 1/2”].

Suggested Applications

• Screens, interior partitioning walls, canopies, and many more.

Materials

• Stainless Steel Grade 316 (standard).

Finishes

• Satin (standard).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arms .
  • Approximately 108mm from the face of the structure to the outside face of glass when installed.
• AB502T Articulating Bolt
  • 50mm [2”] diameter bolt face (visible on glass surface).
  • Clean face visible with only two discreet fastening holes.
  • M12 support bolt.
  • In/out adjustability of +/- 6mm [1/4”] .
  • Suitable for glass from 10mm to 21.5mm thick [3/8” to 7/8”].
  • Recommended diameter hole in glass:
  • Minimum: 31.8 mm [1 1/4”].
  • Recommended in laminate glass: 34.9 mm [1 3/8”].
  • Maximum: 38.1 mm [1 1/2”].

Suggested Applications

• Screens, interior partitioning walls, canopies, and many more.

Materials

• Stainless Steel Grade 316 (standard).

Finishes

• Satin (standard).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arm.
  • Approximately 93mm from the centerline of the spider fixing to the outside face of glass when installed.
• AB502T Articulating Bolt
  • 50mm [2”] diameter bolt face (visible on glass surface).
  • Clean face visible with only two discreet fastening holes.
  • M12 support bolt.
  • In/out adjustability of +/- 6mm [1/4”].
  • Suitable for glass from 10mm to 21.5mm thick [3/8” to 7/8”].
  • Recommended diameter hole in glass:
  • Minimum: 31.8 mm [1 1/4”].
  • Recommended in laminate glass: 34.9 mm [1 3/8”].
  • Maximum: 38.1 mm [1 1/2”].

Suggested Applications

• Screens, interior partitioning walls, canopies, and many more

Materials

• Stainless Steel Grade 316 (standard)

Finishes

• Satin (standard)

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arms.
  • Approximately 108mm from the face of the structure to the outside face of glass when installed.
• AB502T Articulating Bolt
  • 50mm [2”] diameter bolt face (visible on glass surface).
  • Clean face visible with only two discreet fastening holes.
  • M12 support bolt.
  • In/out adjustability of +/- 6mm [1/4”].
  • Suitable for glass from 10mm to 21.5mm thick [3/8” to 7/8”].
  • Recommended diameter hole in glass:
  • Minimum: 31.8 mm [1 1/4”].
  • Recommended in laminate glass: 34.9 mm [1 3/8”].
  • Maximum: 38.1 mm [1 1/2”].

Suggested Applications

• Screens, interior partitioning walls, canopies, and many more.

Materials

• Stainless Steel Grade 316 (standard).

Finishes

• Satin (standard).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arm.
  • Approximately 93mm from the centerline of the spider fixing to the outside face of glass when installed.
• AB502T Articulating Bolt
  • 50mm [2”] diameter bolt face (visible on glass surface).
  • Clean face visible with only two discreet fastening holes.
  • M12 support bolt.
  • In/out adjustability of +/- 6mm [1/4”].
  • Suitable for glass from 10mm to 21.5mm thick [3/8” to 7/8”].
  • Recommended diameter hole in glass:
  • Minimum: 31.8 mm [1 1/4”].
  • Recommended in laminate glass: 34.9 mm [1 3/8”].
  • Maximum: 38.1 mm [1 1/2”].

Suggested Applications

• Screens, interior partitioning walls, canopies, and many more.

Materials

• Stainless Steel Grade 316 (standard).

Finishes

• Satin (standard).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arm (connected back to back).
  • Approximately 70mm from the centerline of the spider fixing to the outside face of glass when installed (distance will change with glass thickness).
• NB501 Non-articulating Bolt
  • 50mm diameter tapered face.
  • M8 support bolt.
  • Minimum 15.9mm [5/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass .
• Interior glass walls, infill panels or canopies with minimal or no snow or wind load.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.
• Side-mounting onto glass or metal fins.
• Monolithic and laminated glass from 10mm to 19mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Four-arms.
  • 150mm between feet of spider.
  • Approximately 70mm from the centerline of the spider fixing to the outside face of glass when installed (distance will change with glass thickness).
• NB501 Non-articulating Bolt
  • 50mm diameter tapered face.
  • M8 support bolt.
  • Minimum 15.9mm [5/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls, infill panels or canopies with minimal or no snow or wind load.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.
• Side-mounting onto glass or metal fins.
• Monolithic and laminated glass from 10mm to 19mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arm.
  • Approximately 92mm from the face of the structure to the outside face of glass when installed (distance will change with glass thickness).
• NB502 Non-articulating Bolt
  • 50mm diameter tapered face.
  • M10 support bolt with a M8 hole in glass.
  • Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls, infill panels or canopies with minimal or no snow or wind load.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.
• Face-mounting onto steel structures, HSS profiles or concrete.
• Monolithic and laminated glass from 10mm to 19mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arm.
  • 150mm between feet of spider.
  • Approximately 92mm from the face of the structure to the outside face of glass when installed (distance will change with glass thickness).
• NB502 Non-articulating Bolt
  • 50mm diameter tapered face.
  • M10 support bolt with a M8 hole in glass.
  • Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls, infill panels or canopies with minimal or no snow or wind load.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.
• Face-mounting onto steel structures, HSS profiles or concrete.
• Monolithic and laminated glass from 10mm to 19mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Four-arms.
  • 150mm between feet of spider.
  • Approximately 92mm from the face of the structure to the outside face of glass when installed (distance will change with glass thickness).
• NB502 Non-articulating Bolt
  • 50mm diameter tapered face.
  • M10 support bolt with a M8 hole in glass.
  • Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls, infill panels or canopies with minimal or no snow or wind load.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.
• Face-mounting onto steel structures, HSS profiles or concrete.
• Monolithic and laminated glass from 10mm to 19mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arm.
  • 150mm between feet of spider.
  • Approximately 85mm from the face of the structure to the outside face of glass when installed (distance will change with glass thickness).
• NB501 Non-articulating Bolt
  • 50mm diameter tapered face.
  • M8 support bolt.
  • Minimum 15.9mm [5/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls, infill panels or canopies with minimal or no snow or wind load.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.
• Face-mounting onto steel structures, HSS profiles or concrete.
• Monolithic and laminated glass from 10mm to 19mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Single-arm.
  • Approximately 77mm from the centerline of the spider fixing to the outside face of glass when installed (distance will change with glass thickness).
• NB502 Non-articulating Bolt
  • 50mm diameter tapered face.
  • M10 support bolt with a M8 hole in glass.
  • Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls, infill panels or canopies with minimal or no snow or wind load.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.
• Side-mounting onto glass or metal fins.
• Monolithic and laminated glass from 10mm to 19mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arm (connected back to back).
  • Approximately 77mm from the centerline of the spider fixing to the outside face of glass when installed (distance will change with glass thickness).
• NB502 Non-articulating Bolt
  • 50mm diameter tapered face.
  • M10 support bolt with a M8 hole in glass.
  • Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls, infill panels or canopies with minimal or no snow or wind load.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.
• Side-mounting onto glass or metal fins.
• Monolithic and laminated glass from 10mm to 19mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arm.
  • 150mm between feet of spider.
  • Approximately 77mm from the centerline of the spider fixing to the outside face of glass when installed (distance will change with glass thickness).
• NB502 Non-articulating Bolt
  • 50mm diameter tapered face.
  • M10 support bolt with a M8 hole in glass.
  • Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls, infill panels or canopies with minimal or no snow or wind load.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.
• Side-mounting onto glass or metal fins.
• Monolithic and laminated glass from 10mm to 19mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Single-arm.
  • Approximately 74mm from the centerline of the spider fixing to the outside face of glass when installed (distance will change with glass thickness).
• NB504 Non-articulating Bolt
  • 50mm diameter tapered face.
  • M12 support bolt.
  • Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls, infill panels or canopies with minimal or no snow or wind load.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.
• Side-mounting onto glass or metal fins.
• Monolithic and laminated glass from 10mm to 25mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Single-arm.
  • Approximately 92mm from the face of the structure to the outside face of glass when installed (distance will change with glass thickness)
• NB502 Non-articulating Bolt
  • 50mm diameter tapered face.
  • M10 support bolt with a M8 hole in glass.
  • Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls, infill panels or canopies with minimal or no snow or wind load.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.
• Face-mounting onto steel structures, HSS profiles or concrete.
• Monolithic and laminated glass from 10mm to 19mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Spider Fitting
  • Double-arm (connected back to back).
  • Approximately 74mm from the centerline of the spider fixing to the outside face of glass when installed (distance will change with glass thickness).
• NB504 Non-articulating Bolt
  • 50mm diameter tapered face.
  • M12 support bolt.
  • Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls, infill panels or canopies with minimal or no snow or wind load.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.
• Side-mounting onto glass or metal fins.
• Monolithic and laminated glass from 10mm to 25mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.