Key Dimensions
- Pin is 17mm diameter.
- Doc has a 50mm diameter tapered face (to mount on exterior of glass).
- In/out adjustability of +/-6mm [1/4”].
- Suitable for monolithic and laminated glass from 10mm to 21mm thick.
- Hole in glass at Doc – minimum 22.2mm [7/8”] diameter.
- Hole at Pin – If connecting into glass, minimum 22.2mm [7/8”] diameter. If connecting into steel or another substructure minimum 12.7mm [1/2”] diameter hole.
Suggested Applications
- Structural glass walls.
- Largest recommended panel size up to 1.5m by 2.5m.
- Single connection best used at corner and end conditions.
- Can be mounted to glass, flat steel, HSS profiles, and timber.
Materials
- Stainless Steel Grade 316 (standard).
- Stainless Steel Grade 304 (upon request).
Finishes
- Satin (standard).
- Bright polish mirror (upon request).
SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.
Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.
Available Textures: Matte, Brushed, Mirror.