Technical Data

Mock Up Infor Below

Key Dimensions

• Spider Fitting
  • Four-arms.
  • 150mm between feet of spider.
  • Approximately 74mm from the centerline of the spider fixing to the outside face of glass when installed (distance will change with glass thickness).

Suggested Applications

• Used with smaller pieces of glass.
• Interior glass walls, infill panels or canopies
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.
• Side-mounting onto glass or metal fins.
• Monolithic and laminated glass from 10mm to 25mm thick.

Loading Capabilities

• Spider is capable of withstanding 0.8kN [180lbf] in plane and 1.5kN [337lbf] perpendicular to plane of glass.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

The Draft Stop will:

• Be located immediately adjacent to the opening
• Be at least 457mm [18”] deep
• Be of noncombustible or limited-combustible material that will stay in place before and during sprinkler operation.

Glass Specification Details

Glass Type

• 12mm tempered or 13.5mm tempered laminated

Glass Fabrication Details

• Each panel has two holes drilled the top edge

Recommended Max Panel Width
1.5m [5’] x 500mm [20”] high

Other Details

Material Details
Head Channel – 6063-T5 Aluminum

Finish Details

• Typically clear anodized
• Painted or coloured anodized finishes available upon request

Supply Details

• Supplied in 3m [12’] length
• Supplied with wedge gaskets, aluminum trim for base of channel and two suspension assemblies per 12’ length

Key Dimensions

• Spider Fitting
  • Double-arm.
  • 200mm between feet of spider.
  • Approximately 76mm from the centerline of spider fixing to the outside face of glass when installed (distance may change with glass thickness – see attached drawings for further clarification).

Suggested Applications

• Best suited for side-mounting onto structures
• Used with larger pieces of glass
• Structural Glass Walls – Glass panels up to 2m by 2m
• Canopies – Glass panels up to 2m by 2m

Loading Capabilities

• Spider is capable of withstanding 1.5kN [335lbs] in plane and 3.7kN [675lbs] perpendicular to plane

Materials

• Stainless Steel Grade 316