- Description
- A heavy-duty one arm “v-shaped” face-mounted spider fitting complete with one articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt
- Superior load bearing capabilities
- Formerly named the S20-1V-AB3 Spider Assembly
- This is a product improvement of the SS201FV-AB701T assembly
- How does our Innovative Front-Mounting Bolt Save You Labour Time and Money?
- They rotate… there is a swivel head within glass bolt that offers 7.5 degrees of articulation – perfect for sloping canopies, walls and facettedA surface that appears curved, made of flat pieces of glass. glass applications
- Fast Install…. it’s very simple to install a front-mounted bolt!
- Step One - Fix the Stella glass bolt to mounting structure
- Step Two - Remove the front cap of Stella glass bolt
- Step Three - Place the glass on Stella glass bolt
- Step Three - Secure the front cap of Stella glass bolt
- That’s it! You’re done!
- Key Dimensions
- Spider Fitting
- One arm
- Approximately 148mm from the face of the structure to the outside face of glass when installed
- AB702T Articulating Bolt
- This bolt is best used with thick glass (over 20mm or 7/8”) and/or where loads at the bolt are very high
- 70mm [2 3/4”] diameter bolt face (visible on glass surface)
- Clean face visible with only two discreet fastening holes
- M16 support bolt
- In/out adjustability of +/- 4mm [5/32”]
- Suitable for glass from 20mm to 40mm thick [7/8” to 1 ½”]
- Recommended diameter hole in glass:
- Minimum: 38.1 mm [1 ½”]
- Recommended in laminate glass: 41.3 mm [1 5/8”]
- Maximum: 44.5mm [1 ¾”]
- Spider Fitting
- Suggested Applications
- Walls, canopies and many more where single-glazed glass is over 20mm
- Need more help? Don’t hesitate to give us a call…really!
- Loading Capabilities
- Please refer to attached pdf drawings
- Materials
- Stainless Steel Grade 316 (standard)
- Duplex Steel Grade 2205 (optional)
- Finish
- Similar to No. 4 Satin (standard)
Photo Credit:
